Career Menu

43 Tool and Die Maker Reviews

Tool and Die Makers give their job an average rating of 3.6 out of 5.0. The Tool and Die Makers happiest with their jobs are employed by Galgon with an average rating of 4.4 while the Tool and Die Makers least happy with their jobs work for Raytheon with an average rating of 2.4.

Submit a Review
Advertisement
Tool and Die Maker at Lockheed Martin
in Marietta, GA

Please give us a one liner to describe this review.

"My overall experience has been good."

What do you like about working at Lockheed Martin?

"I love this company. It has management that cares about the people that work here and they let you do your job without looking over your shoulder constantly."

Do you have any tips for others interviewing with this company?

"They are easy to interview with. Be 100% truthful when you answer questions because many positions here require security clearances and background checks and if you lie, they will find out and that will be the end for you here. They will not hit you up with trick questions and stupid crap. They just want to get a feel for who you are and where you will best fit in. Oh, and if you hated your last job as much as I did, don't tell them that. Just say I am looking for better opportunities or a different direction."

What don't you like about working at Lockheed Martin?

"Sometimes the schedules can be hectic and they might force overtime with little notice, which can be disruptive to your personal life, BUT they do not do it very often. A few times a year at most, so it is not too bad and if you really have a legit reason for not working it, the managers are flexible. A far cry from my last gig at Raytheon."

What suggestions do you have for management?

"More employee-union-management get togethers on improving efficiency and safety at work."

Person You Work For 5 / 5 People You Work With 5 / 5 Work Setting 4 / 5
Support You Get 5 / 5 Rewards You Receive 4 / 5 Growth Opportunities 3 / 5
Company Culture 4 / 5 Way You Work 5 / 5
Tool and Die Maker at Raytheon
in Wichita, KS

Please give us a one liner to describe this review.

"My experience with this company was horrible. Worst I ever worked for."

What do you like about working at Raytheon?

"I loved my co workers. Everyone of them was first rate and you could trust they would never throw you under the bus if things went bad on a project or order."

Do you have any tips for others interviewing with this company?

"If you are that hard up for a job and just cannot bear the thought of leaving your beloved Wichita, go for it. But don't count on working there long. Unless you have 20+ years, you can pretty much count on being layed off more than working. If you are willing to move, Lockheed Martin is far better to work for and we are very well treated here."

What don't you like about working at Raytheon?

"I did not like the management or the politics of this company. Management constantly bullied some employees and favored others. They constantly demanded wage and salary concessions from employees after they took over a great company (Beech Aircraft) and ran it into the ground. Employees are treated like dirt and morale there is as bad as it can be. No job security and layoffs with little or no notice are the norm. Add to that the place is in Wichita Kansas which is about the worst place on the planet to live unless you like being indoors all year because the winters are freezing cold and windy and the summers are hotter than the desert southwest with temps over 100 most days. Glad to be out of that place in Georgia at Lockheed Martin now."

What suggestions do you have for management?

"My only suggestion for the management of this company would be RESIGN."

Person You Work For 2 / 5 People You Work With 4 / 5 Work Setting 3 / 5
Support You Get 3 / 5 Rewards You Receive 3 / 5 Growth Opportunities 1 / 5
Company Culture 1 / 5 Way You Work 2 / 5
Tool and Die Maker at Parker Hannifin
in Lynchburg, VA

What do you like about working at Parker Hannifin?

"Being able to work on the different machines and the challenges that lay therein."

Do you have any tips for others interviewing with this company?

"None that I can offer at this time. Just be yourself."

What don't you like about working at Parker Hannifin?

"The heat! But after awhile it became bearable and I was able to work there."

What suggestions do you have for management?

"Listen to employee suggestions as they have the inside scoop."

Person You Work For 5 / 5 People You Work With 5 / 5 Work Setting 5 / 5
Support You Get 5 / 5 Rewards You Receive 5 / 5 Growth Opportunities 5 / 5
Company Culture 5 / 5 Way You Work 5 / 5

Tool and Die Maker Career Rating Comparison

3.6
All Tool and Die Makers
4.4 Highest Rated Tool and Die Makers is at Galgon (1)
2.4 Lowest Rated Tool and Die Makers is at Raytheon (8)
Tool and Die Maker at Lydall
in Yadkinville, NC

What do you like about working at Lydall?

"Keeps me busy and is good money, skilled job and compensated for my talents"

Do you have any tips for others interviewing with this company?

"Be direct in what you expect, make sure that you make a list of questions for your interview"

What don't you like about working at Lydall?

"Very long commute, not enough control, don't have all the tools to do some jobes"

What suggestions do you have for management?

"Be more involved, listen to employees and care what they say"

Person You Work For 4 / 5 People You Work With 5 / 5 Work Setting 4 / 5
Support You Get 3 / 5 Rewards You Receive 4 / 5 Growth Opportunities 4 / 5
Company Culture 5 / 5 Way You Work 5 / 5
Tool and Die Maker at Lozier
in Omaha, NE

What do you like about working at Lozier?

"I get a variety of different tasks and I enjoy the people I work with."

Do you have any tips for others interviewing with this company?

"Ask several other employees about the company before accepting an offer if you get one."

What don't you like about working at Lozier?

"There are several employees in positions they are under qualified for which makes everyones job a lot harder."

What suggestions do you have for management?

"They need to seek and hire qualified employees to perform the jobs assigned."

Person You Work For 2 / 5 People You Work With 4 / 5 Work Setting 1 / 5
Support You Get 2 / 5 Rewards You Receive 3 / 5 Growth Opportunities 1 / 5
Company Culture 2 / 5 Way You Work 5 / 5
Tool and Die Maker at Adtech
in Harlingen, TX

Please give us a one liner to describe this review.

"A great learning experience"

What do you like about working at Adtech?

"Its is a learnig experience that will never be taken."

Do you have any tips for others interviewing with this company?

"Don't settle for low salary. you must start high because there wont be any payincrease for a long time."

What don't you like about working at Adtech?

"Lack of leadership in some departments causes others to fail."

What suggestions do you have for management?

"Be involve with the associates on floor so to understand there needs to fulfill there job"

Person You Work For 5 / 5 People You Work With 5 / 5 Work Setting 4 / 5
Support You Get 3 / 5 Rewards You Receive 1 / 5 Growth Opportunities 4 / 5
Company Culture 5 / 5 Way You Work 5 / 5
Tool and Die Maker at Breeze Industrial Products
in Saltsburg, PA
Person You Work For 3.9 / 5 People You Work With 4.9 / 5 Work Setting 2.9 / 5
Support You Get 3.1 / 5 Rewards You Receive 3 / 5 Growth Opportunities 2 / 5
Company Culture 3.1 / 5 Way You Work 2.1 / 5
Tool and Die Maker at Galgon

Please give us a one liner to describe this review.

"Great company to work for."

Person You Work For 4.8 / 5 People You Work With 4.8 / 5 Work Setting 4.8 / 5
Support You Get 4.7 / 5 Rewards You Receive 3.6 / 5 Growth Opportunities 3.5 / 5
Company Culture 4.5 / 5 Way You Work 4.8 / 5
Tool and Die Maker at Eureka!
Person You Work For 4.4 / 5 People You Work With 4.4 / 5 Work Setting 3.7 / 5
Support You Get 4 / 5 Rewards You Receive 4.9 / 5 Growth Opportunities 3.8 / 5
Company Culture 4 / 5 Way You Work 4.1 / 5
Tool and Die Maker at Hutchinson Technology
in Eau Claire, WI
Person You Work For 4.1 / 5 People You Work With 4 / 5 Work Setting 3 / 5
Support You Get 3.1 / 5 Rewards You Receive 3.1 / 5 Growth Opportunities 4 / 5
Company Culture 3 / 5 Way You Work 3.1 / 5
Tool and Die Maker at New United Motor Manufacturing
in Fremont, CA
Person You Work For 4.1 / 5 People You Work With 4 / 5 Work Setting 3.3 / 5
Support You Get 4 / 5 Rewards You Receive 3.3 / 5 Growth Opportunities 3.6 / 5
Company Culture 3.8 / 5 Way You Work 3.9 / 5
Tool and Die Maker at Oetiker
Person You Work For 5 / 5 People You Work With 5 / 5 Work Setting 5 / 5
Support You Get 3.8 / 5 Rewards You Receive 3 / 5 Growth Opportunities 1.1 / 5
Company Culture 5 / 5 Way You Work 3.7 / 5
Tool and Die Maker at AccuDie
in Worcester, MA
Person You Work For 4 / 5 People You Work With 4 / 5 Work Setting 4.9 / 5
Support You Get 4 / 5 Rewards You Receive 3 / 5 Growth Opportunities 2.7 / 5
Company Culture 2 / 5 Way You Work 4.8 / 5
Tool and Die Maker at New Hampshire Ball Bearings

Please give us a one liner to describe this review.

"NHBB was an aerospace manufacture of spherical bearings and rod ends for aircraft. Excellent organization."

Tool and Die Maker at Hutchinson Technology

Please give us a one liner to describe this review.

"Interesting place to work for."

Advertisement
You can cancel email alerts at any time.
Got it! Your job alert was created
Trending Jobs
Advertisement
We noticed that your web browser is outdated!

Update your browser to have a more positive job search experience.

Upgrade My Browser

×